Repository navigation
Conversation
|
Merge Check Failed: No CR Numbers Found Error: No Change Request numbers were found. Please add Change Request numbers to your pull request description in the format CRs-Fixed: 12345 or link GitHub issues that are associated with Change Requests. |
PR #1331 — validate-patchPR: #1331
Final Summary
|
PR #1331 — checker-log-analyzerPR: #1331
Detailed report: Full report
|
…1UXD HDMI bridge support" This reverts commit 5b89aea. The HDMI bridge support is being re-picked as-is from the upstream posting (FROMLIST) in the next commit, so the locally-authored PENDING version with divergent node/label naming is removed first. Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com>
… support Add support for the Lontium LT9611UXD DSI-to-HDMI bridge, enabled by default on the Talos Lyra EVK base board DT, to provide HDMI output on the DSI0_B2B connector on the carrier card. LT9611UXD is connected through I2C2, with reset and interrupt connected to TLMM GPIO61 and GPIO60 respectively. Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com> Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-1-585caa39cd7c@oss.qualcomm.com
…rlay Add a DT overlay for Talos Lyra EVK, to enable DLC0697 panel when DLC daughter card connected to DSI0_B2B on carrier card. Configure DLC0697 reset GPIO, supplies, pinctrl states and GPIO backlight controlled through TLMM GPIO 2. Disable the default HDMI bridge and connector in favour of the DSI panel. Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com> Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-2-585caa39cd7c@oss.qualcomm.com
…overlay Add a DT overlay to enable Raspberry Pi 7-inch DSI panel connected to DSI 22pin on the carrier card. DSI0 from SOC is routed through MUX which can be selected by DIP switch S1016.5 ON for enabling this 22pin connector. Add the regulator and backlight controller at I2C2 address 0x45, Goodix GT911 touch controller, panel power and reset control, and a 2-lane DSI connection. Disable the default HDMI bridge and connector in favour of the RPi DSI panel. Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com> Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-3-585caa39cd7c@oss.qualcomm.com
…panel overlay Add a DT overlay to enable Waveshare 8-inch DSI panel connected to DSI 22pin on the carrier card. DSI0 from SOC is routed through MUX which can be selected by DIP switch S1016.5 ON, for enabling this 22pin connector. Add the JD9365DA-H3 panel, GPIO expander at I2C2 address 0x45 for panel power, reset and backlight, and the Goodix GT9271 touch controller. Disable the default HDMI bridge and connector in favour of the Waveshare DSI panel. Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com> Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-4-585caa39cd7c@oss.qualcomm.com
…nel overlay Add a DT overlay for Talos Lyra EVK, to enable LVDS interface when LVDS daughter card is connected to DSI0_B2B on carrier card. There is SN65DSI84 DSI-to-LVDS bridge on the daughter card which is connected through I2C5 with reset and interrupt connected to GPIO61 and GPIO60. Backlight is driven by a generic clock-based PWM using GCC_GP3 on TLMM GPIO59, with an additional backlight enable GPIO on TLMM GPIO2. Disable the default HDMI bridge and connector in favour of the LVDS panel. Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-6-585caa39cd7c@oss.qualcomm.com
Enable CONFIG_PWM_CLK so the generic clock-based PWM driver is available, used by the Talos Lyra EVK LVDS panel overlay backlight. Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com> Link: https://lore.kernel.org/r/20261021-lyra-display-upstream-post-v1-5-585caa39cd7c@oss.qualcomm.com
ed1a5bb to
19a3982
Compare
PR #1331 — validate-patchPR: #1331
Final Summary
|
PR #1331 — checker-log-analyzerPR: #1331
Detailed report: Full report
|
alos Lyra EVK SoC card are mounted on the Lyra carrier card. The
DSI0 interface from SoC card is routed to either the 22-pin DSI
connector on carrier card named as JDISP1 DSI0 or to the DSI0_B2B
connector, through a MUX which can be selected by a hardware DIP
switch. There are multiple daughter cards designed that can be
connected to this B2B connector.
The below B2B display interfaces are enabled by default in base DTB:
DSI-to-HDMI using the LT9611UXD daughter card
Below overlay DTs are added for additional display configurations:
talos-lyra-evk-dlc0697: DLC0697 DSI panel for Lyra with DLC
daughter card
talos-lyra-evk-raspberrypi-dsi-7inch: Raspberry Pi 7-inch DSI
panel with touch via the 22-pin DSI connector for Lyra
talos-lyra-evk-waveshare-dsi-8inch: Waveshare 8-inch DSI panel
with touch via the 22-pin DSI connector for Lyra
talos-lyra-evk-lvds-auo,g133han01: AUO G133HAN01 LVDS panel for
Lyra with LVDS daughter card
Link: https://lore.kernel.org/all/20261021-lyra-display-upstream-post-v1-1-585caa39cd7c@oss.qualcomm.com/
Link: https://lore.kernel.org/all/20261021-lyra-display-upstream-post-v1-2-585caa39cd7c@oss.qualcomm.com/
Link: https://lore.kernel.org/all/20261021-lyra-display-upstream-post-v1-3-585caa39cd7c@oss.qualcomm.com/
Link: https://lore.kernel.org/all/20261021-lyra-display-upstream-post-v1-4-585caa39cd7c@oss.qualcomm.com/
Link: https://lore.kernel.org/all/20261021-lyra-display-upstream-post-v1-6-585caa39cd7c@oss.qualcomm.com/
CRs-Fixed: 4647028