[BUG]: geo projections lose their D3 default rotation

Description

Geo.updateProjection calls projection.rotate([-rotation.lon, -rotation.lat, rotation.roll]) unconditionally. For a world-scope map projection.rotation defaults to [0, 0, 0], so any rotation the D3 projection ships with is discarded.

Six of the projections in plotly.js carry a non-identity default rotation:

projection	D3 default rotation
`albers`	`[96, 0, 0]`
`bertin1953`	`[-16.5, -42, 0]`
`gringorten quincuncial`	`[-90, -90, 45]`
`peirce quincuncial`	`[-90, -90, 45]`
`sinu mollweide`	`[-20, -55, 0]`
`wiechel`	`[0, -90, 45]`

For the quincuncials and wiechel that rotation is geometric: it places the sphere in the polar aspect and tilts the square 45°, and is applied inside the projection's own constructor:

// d3-geo-projection/src/quincuncial/index.js
return projection(projectQuincuncial)
    .rotate([-90, -90, 45])
    .clipAngle(180 - 1e-3);

Replacing it renders a different orientation from the one D3 defines. (For albers, D3's [96, 0, 0] preconfigures it for the USA, so discarding it is probably intended.)

Screenshots/Video

For 'peirce quincuncial':

D3 projection	Plotly projection

Steps to reproduce

Be on master
Open Plotly devtools
Enter the following snippet into the browser console:

Plotly.newPlot(gd, [{
    type: 'choropleth',
    locations: ['GHA', 'ARG', 'AUS', 'CAN'],
    z: [1, 2, 3, 4],
    showscale: false
}], {
    geo: { projection: { type: 'peirce quincuncial' }, fitbounds: false },
    height: 800
});

Note that
Expected: the canonical peirce quincuncial orientation.
Actual: rendered with rotation [0, 0, 0].

Screenshots

Notes

A fix needs to compose the requested rotation onto each projection's default rather than replace it, since d3.geoProjection.rotate() replaces
This was discovered in fix: Improve handling of auto-fitting with many features and the antimeridian on geo traces #7948. It's possible that this is intentional for a good reason, but it would be worth looking at changing it regardless.

fix(geo): preserve D3 projection default rotation when user does not …

Independently verified at head ea028a66f8 (full agent, local clone + node REPL).

Enumeration confirms the report exactly. I instantiated all 84 projections listed in constants.projNames (src/plots/geo/constants.js:4) against the installed d3-geo@1.12.1 / d3-geo-projection@2.9.0: precisely six carry non-identity constructor rotations, matching this issue's table — albers [96,0,0], bertin1953 [-16.5,-42,0], gringorten quincuncial/peirce quincuncial [-90,-90,45], sinu mollweide [-20,-55,0], wiechel [0,-90,45]; the other 78 default to [0,0,0]. (albers usa has no .rotate at all — getProjection stubs missing methods at src/plots/geo/geo.js:724-732.) Replacement semantics reproduced:

const p = require('d3-geo-projection').geoPeirceQuincuncial();
p.rotate();             // [-90, -90, 45]  (constructor)
p.rotate([-0, -0, 0]);  // what updateProjection does for world scope
p.rotate();             // [0, 0, 0]  — canonical polar aspect discarded

The unconditional replace is src/plots/geo/geo.js:307, fed by coercion defaults that are [0,0,0]-based for world scope (src/plots/geo/layout_defaults.js:118-122, scopeDefaults.world.projRotate). None of the six affected projections is clipped per lonaxisSpan (src/plots/geo/constants.js:126), so all of them flow through this exact path.

One caution on the compose-onto-default fix direction: additive composition quietly flips the meaning of projection.rotation.* from absolute d3 angles to offsets relative to the constructor rotation, and several subsystems persist/read those values assuming they're absolute:

zoom.js reads projection.rotate() off the live projection and emits/stores 'geo.projection.rotation.lon': -rotate[0] during pan (both the plotly_relayouting payload and syncCb);
saveViewInitial (geo.js:629-659) snapshots rotation.lon for uirevision/reset;
the fitbounds branch deletes projection.rotation.lon(/lat) and lets it be re-derived (layout_defaults.js:213-221).

Under an offset scheme each convention needs revisiting, and any previously persisted relayout/uirevision values would be misinterpreted after upgrade.

A lower-blast-radius alternative: keep .replace() semantics and instead make the coerced defaults correct per projection — a small dfltRotation table consulted in handleGeoDefaults when coercing projection.rotation.lat/.roll (world scope). rotation.lon can stay center-of-lonaxis.range-derived, so the existing "lon follows the view" behavior is untouched; with nothing set by the user, the layout then already equals the D3 constructor rotation and geo.js:307 keeps writing absolute angles. Zoom/uirevision/fitbounds invariants survive unchanged. Either way the fix is a visible orientation change for the same six projections, so image baselines need updating — but this variant doesn't change what a stored rotation value means.

Happy to prototype either variant with jasmine coverage over the six types if maintainers have a preference on semantics.

Navigation Menu

[BUG]: geo projections lose their D3 default rotation #7949

Description

Screenshots/Video

Steps to reproduce

Screenshots

Notes

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

[BUG]: geo projections lose their D3 default rotation #7949

Description

Description

Screenshots/Video

Steps to reproduce

Screenshots

Notes

Activity

CAOShurong commented on Aug 24, 2026

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions