grandixximo · Oct 13, 2026 · Oct 13, 2026
diff --git a/configs/sim/axis/plasma/imperial.ini b/configs/sim/axis/plasma/imperial.ini
@@ -30,7 +30,7 @@ MAX_FEED_OVERRIDE       = 1.5
 PROGRAM_PREFIX          = ../../nc_files
 INTRO_GRAPHIC           = linuxcnc.gif
 INTRO_TIME              = 1
-CYCLE_TIME              = 100
+CYCLE_TIME              = 0.100
 INCREMENTS              = 1, .1, .01, .001, .0001
 MDI_HISTORY_FILE        = imperial_mdi_history.txt
 OPEN_FILE               = ""

diff --git a/configs/sim/axis/plasma/metric.ini b/configs/sim/axis/plasma/metric.ini
@@ -30,7 +30,7 @@ MAX_FEED_OVERRIDE       = 1.5
 PROGRAM_PREFIX          = ../../nc_files
 INTRO_GRAPHIC           = linuxcnc.gif
 INTRO_TIME              = 1
-CYCLE_TIME              = 100
+CYCLE_TIME              = 0.100
 INCREMENTS              = 10, 1, .1, .01, .001
 MDI_HISTORY_FILE        = metric_mdi_history.txt
 OPEN_FILE               = ""

diff --git a/configs/sim/axis/plasma/plasmac2/migrate.py b/configs/sim/axis/plasma/plasmac2/migrate.py
@@ -263,7 +263,7 @@ def do_ini_file(self):
                 config[lNum] = 'TOOL_EDITOR = tooledit x y\n'
                 done.append('te')
             elif section[lNum].startswith('CYCLE_TIME') and 'ct' not in done:
-                config[lNum] = 'CYCLE_TIME = 100\n'
+                config[lNum] = 'CYCLE_TIME = 0.100\n'
                 done.append('ct')
             elif section[lNum].startswith('USER_COMMAND_FILE') and 'uc' not in done:
                 config[lNum] = 'USER_COMMAND_FILE = ./plasmac2/plasmac2.py\n'
@@ -282,7 +282,7 @@ def do_ini_file(self):
             elif option == 'te' and option not in done:
                 config.insert(insert,'TOOL_EDITOR = tooledit x y\n')
             elif option == 'ct' and option not in done:
-                config.insert(insert,'CYCLE_TIME = 100\n')
+                config.insert(insert,'CYCLE_TIME = 0.100\n')
             elif option == 'uc' and option not in done:
                 config.insert(insert,'USER_COMMAND_FILE = ./plasmac2/plasmac2.py\n')
             elif option == 'po' and option not in done:

diff --git a/configs/sim/gmoccapy/6_axis.ini b/configs/sim/gmoccapy/6_axis.ini
@@ -5,7 +5,7 @@ MACHINE = gmoccapy_9_axis
 
 [DISPLAY]
 DISPLAY = gmoccapy
-CYCLE_TIME = 150
+CYCLE_TIME = 0.150
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 PROGRAM_PREFIX = ../../nc_files/

diff --git a/configs/sim/gmoccapy/7_axis.ini b/configs/sim/gmoccapy/7_axis.ini
@@ -5,7 +5,7 @@ MACHINE = gmoccapy_9_axis
 
 [DISPLAY]
 DISPLAY = gmoccapy
-CYCLE_TIME = 150
+CYCLE_TIME = 0.150
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 PROGRAM_PREFIX = ../../nc_files/

diff --git a/configs/sim/gmoccapy/7_axis_tool.ini b/configs/sim/gmoccapy/7_axis_tool.ini
@@ -5,7 +5,7 @@ MACHINE = gmoccapy_9_axis
 
 [DISPLAY]
 DISPLAY = gmoccapy
-CYCLE_TIME = 150
+CYCLE_TIME = 0.150
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 PROGRAM_PREFIX = ../../nc_files/

diff --git a/configs/sim/gmoccapy/8_axis.ini b/configs/sim/gmoccapy/8_axis.ini
@@ -5,7 +5,7 @@ MACHINE = gmoccapy_9_axis
 
 [DISPLAY]
 DISPLAY = gmoccapy
-CYCLE_TIME = 150
+CYCLE_TIME = 0.150
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 PROGRAM_PREFIX = ../../nc_files/

diff --git a/configs/sim/gmoccapy/9_axis.ini b/configs/sim/gmoccapy/9_axis.ini
@@ -5,7 +5,7 @@ MACHINE = gmoccapy_9_axis
 
 [DISPLAY]
 DISPLAY = gmoccapy
-CYCLE_TIME = 150
+CYCLE_TIME = 0.150
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
 PROGRAM_PREFIX = ../../nc_files/

diff --git a/configs/sim/gmoccapy/gmoccapy.ini b/configs/sim/gmoccapy/gmoccapy.ini
@@ -19,7 +19,7 @@ DISPLAY = gmoccapy
 # ERROR       -q
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME = 100
+CYCLE_TIME = 0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    = 1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_4_axis.ini b/configs/sim/gmoccapy/gmoccapy_4_axis.ini
@@ -9,7 +9,7 @@ DEBUG = 0
 DISPLAY = gmoccapy
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_800x600.ini b/configs/sim/gmoccapy/gmoccapy_800x600.ini
@@ -18,7 +18,7 @@ DISPLAY = gmoccapy -i
 # ERROR       -q
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME = 100
+CYCLE_TIME = 0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    = 1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_XYZAB.ini b/configs/sim/gmoccapy/gmoccapy_XYZAB.ini
@@ -31,7 +31,7 @@ DISPLAY = gmoccapy
 
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_XYZAC.ini b/configs/sim/gmoccapy/gmoccapy_XYZAC.ini
@@ -22,7 +22,7 @@ EMBED_TAB_LOCATION = box_right
 EMBED_TAB_COMMAND = gladevcp -H pendant_5_axis.hal pendant_5_axis.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_XYZCW.ini b/configs/sim/gmoccapy/gmoccapy_XYZCW.ini
@@ -18,7 +18,7 @@ DEBUG = 0
 DISPLAY = gmoccapy
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_blockdelete.ini b/configs/sim/gmoccapy/gmoccapy_blockdelete.ini
@@ -18,7 +18,7 @@ EMBED_TAB_LOCATION = box_custom_4
 EMBED_TAB_COMMAND = gladevcp -x {XID} -c blockdelete -H blockdelete.hal -u blockdelete.py blockdelete.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    =  1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_left_panel.ini b/configs/sim/gmoccapy/gmoccapy_left_panel.ini
@@ -18,7 +18,7 @@ EMBED_TAB_LOCATION = box_left
 EMBED_TAB_COMMAND = gladevcp -x {XID} -H v_buttonlist.hal v_buttonlist.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_messages.ini b/configs/sim/gmoccapy/gmoccapy_messages.ini
@@ -14,7 +14,7 @@ DEBUG = 0
 DISPLAY = gmoccapy
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_pedant.ini b/configs/sim/gmoccapy/gmoccapy_pedant.ini
@@ -18,7 +18,7 @@ EMBED_TAB_LOCATION = box_right
 EMBED_TAB_COMMAND = gladevcp -H pendant.hal pendant.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini b/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini
@@ -46,7 +46,7 @@ NGCGUI_SUBFILE    = ""
 
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    =  1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_pyngcgui_gcmc.ini b/configs/sim/gmoccapy/gmoccapy_pyngcgui_gcmc.ini
@@ -58,7 +58,7 @@ TTT_PREAMBLE      = in_std.ngc
 
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    =  1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_qt_messages.ini b/configs/sim/gmoccapy/gmoccapy_qt_messages.ini
@@ -18,7 +18,7 @@ DISPLAY = gmoccapy -d
 # ERROR       -q
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME = 100
+CYCLE_TIME = 0.100
 
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    = 1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_right_panel.ini b/configs/sim/gmoccapy/gmoccapy_right_panel.ini
@@ -14,7 +14,7 @@ EMBED_TAB_LOCATION = box_right
 EMBED_TAB_COMMAND = gladevcp -x {XID} -H vcp_box.hal vcp_box.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini b/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini
@@ -21,7 +21,7 @@ EMBED_TAB_LOCATION = box_right
 EMBED_TAB_COMMAND = gladevcp -g 995x64+0+805 -H h_buttonlist.hal h_buttonlist.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini b/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini
@@ -26,7 +26,7 @@ EMBED_TAB_LOCATION = box_right
 EMBED_TAB_COMMAND = gladevcp -x {XID} -H tool_sensor.hal tool_sensor.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini b/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini
@@ -38,7 +38,7 @@ EMBED_TAB_COMMAND = gladevcp -q -x {XID} -H vcp_box.hal vcp_box.glade
 #EMBED_TAB_COMMAND = camview-emc -w {XID}
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe.ini b/configs/sim/gmoccapy/lathe_configs/lathe.ini
@@ -16,7 +16,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 0
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe_C.ini b/configs/sim/gmoccapy/lathe_configs/lathe_C.ini
@@ -16,7 +16,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 0
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini b/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini
@@ -16,7 +16,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 0
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini b/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini
@@ -16,7 +16,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 1
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini b/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini
@@ -17,7 +17,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 0
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini b/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini
@@ -16,7 +16,7 @@ LATHE = 1
 BACK_TOOL_LATHE = 0
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini b/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini
@@ -23,7 +23,7 @@ EMBED_TAB_LOCATION = box_coolant_and_spindle
 EMBED_TAB_COMMAND = gladevcp -x {XID} -u plasma.py -H plasma.hal plasma.glade
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest value that will be allowed for feed override, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.5

diff --git a/configs/sim/gscreen/gscreen.ini b/configs/sim/gscreen/gscreen.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_SPINDLE_OVERRIDE = 2.0

diff --git a/configs/sim/gscreen/gscreen_custom/9axis.ini b/configs/sim/gscreen/gscreen_custom/9axis.ini
@@ -22,7 +22,7 @@ DEBUG = 0
 DISPLAY =             gscreen -c 9_axis
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_SPINDLE_OVERRIDE = 2.0

diff --git a/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini b/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen -c gaxis_no_plot -c
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_FEED_OVERRIDE =     2.0

diff --git a/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini b/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen -c gaxis -c
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_FEED_OVERRIDE =     2.0

diff --git a/configs/sim/gscreen/gscreen_custom/industrial.ini b/configs/sim/gscreen/gscreen_custom/industrial.ini
@@ -22,7 +22,7 @@ DEBUG = 0
 DISPLAY = gscreen -c industrial -d
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_FEED_OVERRIDE =     1.2

diff --git a/configs/sim/gscreen/gscreen_custom/tester.ini b/configs/sim/gscreen/gscreen_custom/tester.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen -c tester -d
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Prefix to be used
 PROGRAM_PREFIX = ../../../nc_files/

diff --git a/configs/sim/gscreen/gscreen_custom/tester_metric.ini b/configs/sim/gscreen/gscreen_custom/tester_metric.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen -c tester -d
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_SPINDLE_OVERRIDE =      2.0

diff --git a/configs/sim/gscreen/gscreen_mm.ini b/configs/sim/gscreen/gscreen_mm.ini
@@ -23,7 +23,7 @@ DEBUG = 0
 DISPLAY = gscreen
 
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 
 # Highest / lowest value that will be allowed for overrides, 1.0 = 100%
 MAX_SPINDLE_OVERRIDE =      2.0

diff --git a/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini b/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini
@@ -33,7 +33,7 @@ NGCGUI_SUBFILE    = iquad.ngc
 NGCGUI_SUBFILE    = qpocket.ngc
 NGCGUI_SUBFILE    = ""
 
-CYCLE_TIME =            300
+CYCLE_TIME =            0.300
 MAX_SPINDLE_OVERRIDE = 2.0
 MIN_SPINDLE_OVERRIDE = .5
 MAX_FEED_OVERRIDE = 2.0

diff --git a/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini b/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini
@@ -33,7 +33,7 @@ NGCGUI_SUBFILE    = iquad.ngc
 NGCGUI_SUBFILE    = qpocket.ngc
 NGCGUI_SUBFILE    = ""
 
-CYCLE_TIME =            300
+CYCLE_TIME =            0.300
 MAX_SPINDLE_OVERRIDE = 2.0
 MIN_SPINDLE_OVERRIDE = .5
 MAX_FEED_OVERRIDE = 2.0

diff --git a/configs/sim/gscreen/silverdragon/silverdragon.ini b/configs/sim/gscreen/silverdragon/silverdragon.ini
@@ -13,7 +13,7 @@ DEBUG = 0
 [DISPLAY]
 DISPLAY = gscreen -c silverdragon
 # Cycle time, in milliseconds, that display will sleep between polls
-CYCLE_TIME =            100
+CYCLE_TIME =            0.100
 #PREFERENCE_FILE_PATH = /home/jim/linuxcnc/configs/sim.gscreen.gscreen_custom/silverdragon.pref
 # Values that will be allowed for override, 1.0 = 100%
 MAX_FEED_OVERRIDE    =  1.5