qualcommax: ipq8072: partial revert NVMEM MAC addresses for Linksys MX5300

Partially revert commit e8c74e8.

Assigning LAN MAC addresses incremented by one causes a conflict
with the addresses for the 2.4G wireless interface.

Additionally, invalid wireless network interface assignments are revoked.

Retain the change setting label-mac-device to &swport5 WAN port

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: openwrt/openwrt#25239
Signed-off-by: Robert Marko <robimarko@gmail.com>

Author: testuser7

target/linux/qualcommax/dts/ipq8072-mx5300.dts

@@ -458,7 +458,7 @@
 			phy-handle = <&qca8075_0>;
 			phy-mode = "psgmii";
 			pcs-handle = <&uniphy0 0>;
-			nvmem-cells = <&hw_mac_addr 1>;
+			nvmem-cells = <&hw_mac_addr 0>;
 			nvmem-cell-names = "mac-address";
 		};
 
@@ -468,7 +468,7 @@
 			phy-handle = <&qca8075_1>;
 			phy-mode = "psgmii";
 			pcs-handle = <&uniphy0 1>;
-			nvmem-cells = <&hw_mac_addr 1>;
+			nvmem-cells = <&hw_mac_addr 0>;
 			nvmem-cell-names = "mac-address";
 		};
 
@@ -478,7 +478,7 @@
 			phy-handle = <&qca8075_2>;
 			phy-mode = "psgmii";
 			pcs-handle = <&uniphy0 2>;
-			nvmem-cells = <&hw_mac_addr 1>;
+			nvmem-cells = <&hw_mac_addr 0>;
 			nvmem-cell-names = "mac-address";
 		};
 
@@ -488,7 +488,7 @@
 			phy-handle = <&qca8075_3>;
 			phy-mode = "psgmii";
 			pcs-handle = <&uniphy0 3>;
-			nvmem-cells = <&hw_mac_addr 1>;
+			nvmem-cells = <&hw_mac_addr 0>;
 			nvmem-cell-names = "mac-address";
 		};
 
@@ -539,8 +539,8 @@
 			reg = <0x00010000 0 0 0 0>;
 
 			qcom,ath10k-calibration-variant = "Linksys-MX5300";
-			nvmem-cell-names = "pre-calibration", "mac-address";
-			nvmem-cells = <&caldata_qca9984>, <&hw_mac_addr 2>;
+			nvmem-cell-names = "pre-calibration";
+			nvmem-cells = <&caldata_qca9984>;
 		};
 	};
 };
@@ -549,6 +549,4 @@
 	status = "okay";
 
 	qcom,ath11k-calibration-variant = "Linksys-MX5300";
-	nvmem-cells = <&hw_mac_addr 3>;
-	nvmem-cell-names = "mac-address";
 };