diff --git a/README.md b/README.md
index 5be467957..cf7408d8e 100644
--- a/README.md
+++ b/README.md
@@ -117,6 +117,7 @@ ZTE K543                 SSC337DE     SC401AI   MT7601U_USB      NOR_16M   done
 ZTE K545                 T31X         SC4336    ATBM6012B_USB    NOR_16M   done
 4G Camera XG521 V1.2     GK7202V300   GC1054    EC800E-CN_USB    NOR_8M    done
 XM IPG-G3-WR             GK7202V300   JXH63     ATBM60321S_USB   NOR_8M    done
+XM IPC-RM1-BLK7202V3     GK7202V300   SC223A    SV6115C_USB      NOR_8M    video-yes, wifi-yes (ssv6x5x#1), pan/tilt+ir+audio untested
 ```
 
 
diff --git a/devices/gk7202v300_lite_xm-rm1/br-ext-chip-goke/configs/gk7202v300_lite_xm-rm1_defconfig b/devices/gk7202v300_lite_xm-rm1/br-ext-chip-goke/configs/gk7202v300_lite_xm-rm1_defconfig
new file mode 100644
index 000000000..a77563d81
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/br-ext-chip-goke/configs/gk7202v300_lite_xm-rm1_defconfig
@@ -0,0 +1,66 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABI=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-openipc-linux-musleabi"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/gk7202v300.generic.config"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_XZ=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="goke"
+BR2_OPENIPC_SOC_MODEL="gk7202v300"
+BR2_OPENIPC_SOC_FAMILY="gk7205v200"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_GOKE_OSDRV_GK7205V200=y
+BR2_PACKAGE_HISILICON_OPENSDK=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_SSV635X_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
+BR2_PACKAGE_GPIO_MOTORS=y
diff --git a/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S35pinworks b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S35pinworks
new file mode 100755
index 000000000..6c681999a
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S35pinworks
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+case "$1" in
+        start)
+
+            # Bring power to SD CARD (GPIO70)
+            gpio clear 70
+            gpio unexport 70
+
+            # same thru devmem
+            #devmem 0x120B8400 32 0x40		# set GPIO8_6 to output
+            #devmem 0x120B8100 32 0x00		# set GPIO8_6 to LO
+
+            # bumping SDHCI driver
+            echo 10010000.sdhci > /sys/bus/platform/drivers/sdhci-goke/unbind
+            echo 10010000.sdhci > /sys/bus/platform/drivers/sdhci-goke/bind
+
+esac
+
+exit 0
diff --git a/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S80pinworks b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S80pinworks
new file mode 100755
index 000000000..2f191312d
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/init.d/S80pinworks
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+case "$1" in
+        start)
+
+            # Unmuxing GPIO12, GPIO14, GPIO15 (motor H connector. pins 5, 4, 3)
+            devmem 0x120c0010 32 0x1e02
+            devmem 0x120c0018 32 0x1d02
+            devmem 0x120c001c 32 0x1402
+
+            # Unpower motors winding (GPIO13 is HI after kernel modules load)
+            gpio clear 13
+            gpio unexport 13
+
+esac
+
+exit 0
diff --git a/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/wireless/usb b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/wireless/usb
new file mode 100755
index 000000000..c70159fd8
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/general/overlay/etc/wireless/usb
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+if [ "$1" = "ssv6x5x-generic" ]; then
+        modprobe ssv6x5x
+        exit 0
+fi
+
+exit 1
diff --git a/devices/gk7202v300_lite_xm-rm1/general/overlay/usr/share/openipc/customizer.sh b/devices/gk7202v300_lite_xm-rm1/general/overlay/usr/share/openipc/customizer.sh
new file mode 100644
index 000000000..b109ef3c8
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# XM board IPC-RM1-BLK7202V3-M43A-WIFI (GK7202V300 + SC223A, Wi-Fi SV6115C on USB),
+# pan/tilt dome. GPIOs taken from the stock firmware (loadpublic gpio_pin=, LIBXMVIDEO.json).
+#
+# Set custom upgrade url
+#
+fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/gk7202v300_lite_xm-rm1-nor.tgz'
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev ssv6x5x-generic
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+# Pan/tilt: two unipolar steppers driven straight from GPIO (gpio-motors)
+#
+fw_setenv ptz_control gpio
+fw_setenv ptz_gpio '13 15 14 12 55 54 53 52'
+fw_setenv ptz_caps 'pan tilt'
+#
+# Set majestic settings
+#
+cli -s .nightMode.irCutPin1 56
+cli -s .nightMode.irCutPin2 58
+cli -s .nightMode.backlightPin 16
+cli -s .nightMode.lightMonitor true
+cli -s .nightMode.lightSensorPin 57
+cli -s .audio.enabled true
+cli -s .audio.outputEnabled true
+cli -s .audio.speakerPin 51
+
+exit 0
diff --git a/devices/gk7202v300_lite_xm-rm1/general/scripts/excludes/gk7202v300_lite.list b/devices/gk7202v300_lite_xm-rm1/general/scripts/excludes/gk7202v300_lite.list
new file mode 100644
index 000000000..6310cbf89
--- /dev/null
+++ b/devices/gk7202v300_lite_xm-rm1/general/scripts/excludes/gk7202v300_lite.list
@@ -0,0 +1,73 @@
+/etc/sensors/4l_sc223a_i2c_1080p.ini
+/etc/sensors/bt656_720p.ini
+/etc/sensors/gc1054_i2c_720p.ini
+/etc/sensors/gc2053_i2c_1080p.ini
+/etc/sensors/gc4023_i2c_4M.ini
+/etc/sensors/gc4653_i2c_4M.ini
+/etc/sensors/gc5603_i2c_5M.ini
+/etc/sensors/imx307_i2c_2l_1080p.ini
+/etc/sensors/imx327_i2c_1080p.ini
+/etc/sensors/4M_imx335_i2c.ini
+/etc/sensors/imx335_i2c_4M.ini
+/etc/sensors/imx335_i2c_5M.ini
+/etc/sensors/5M_imx335.ini
+/etc/sensors/jxf23_i2c_1080p.ini
+/etc/sensors/jxf23_i2c_dc_1080p.ini
+/etc/sensors/jxh63_i2c_720p.ini
+/etc/sensors/mis2008_i2c_1080p.ini
+/etc/sensors/os02g10_i2c_1080p.ini
+/etc/sensors/sc200ai_i2c_1080p.ini
+/etc/sensors/sc2232h_i2c_1080p.ini
+/etc/sensors/sc2239_i2c_1080p.ini
+/etc/sensors/sc2335_i2c_1080p.ini
+/etc/sensors/smtsec_imx307_i2c_4l_1080p.ini
+/etc/sensors/sp2308_i2c_1080p.ini
+#
+/etc/sensors/high-fps/imx307_1280x720_60fps.ini
+/etc/sensors/high-fps/imx307_1920x1080_60fps.ini
+/etc/sensors/high-fps/imx307_368x304_200fps.ini
+/etc/sensors/high-fps/imx307_640x480_130fps.ini
+/etc/sensors/high-fps/imx335_1280x720_120fps.ini
+/etc/sensors/high-fps/imx335_1296x972_64fps.ini
+/etc/sensors/high-fps/imx335_1920x1080_55fps.ini
+/etc/sensors/high-fps/imx335_2592x1944_45fps.ini
+/etc/sensors/high-fps/imx335_800x480_240fps.ini
+#
+/etc/sensors/iq/imx335.ini
+/etc/sensors/iq/ov2735.ini
+/etc/sensors/iq/sc2232.ini
+/etc/sensors/iq/sc2239.ini
+#
+/usr/lib/sensors/libsns_ar0237.so
+/usr/lib/sensors/libsns_bt656.so
+/usr/lib/sensors/libsns_f37.so
+/usr/lib/sensors/libsns_gc2053.so
+/usr/lib/sensors/libsns_gc2053_forcar.so
+/usr/lib/sensors/libsns_gc4023.so
+/usr/lib/sensors/libsns_gc4653_2l.so
+/usr/lib/sensors/libsns_gc5603.so
+/usr/lib/sensors/libsns_imx290.so
+/usr/lib/sensors/libsns_imx307.so
+/usr/lib/sensors/libsns_imx307_2l.so
+/usr/lib/sensors/libsns_imx327.so
+/usr/lib/sensors/libsns_imx327_2l.so
+/usr/lib/sensors/libsns_imx335.so
+/usr/lib/sensors/libsns_imx335_2l.so
+/usr/lib/sensors/libsns_mis2008.so
+/usr/lib/sensors/libsns_os02g10.so
+/usr/lib/sensors/libsns_os05a.so
+/usr/lib/sensors/libsns_ov2718.so
+/usr/lib/sensors/libsns_sc200ai.so
+/usr/lib/sensors/libsns_sc2231.so
+/usr/lib/sensors/libsns_sc2232h.so
+/usr/lib/sensors/libsns_sc2235.so
+/usr/lib/sensors/libsns_sc223a_4l.so
+/usr/lib/sensors/libsns_sc2239.so
+/usr/lib/sensors/libsns_sc2335.so
+/usr/lib/sensors/libsns_sc3235.so
+/usr/lib/sensors/libsns_sc3335.so
+/usr/lib/sensors/libsns_sc3336.so
+/usr/lib/sensors/libsns_sc4236.so
+/usr/lib/sensors/libsns_sc500ai.so
+/usr/lib/sensors/libsns_sp2305.so
+/usr/lib/sensors/libsns_sp2308.so